Intex Aqua Pride

Intex Aqua Pride runs Android 6.0 Marshmallow It has a 5-inch FWVGA (854x480 pixel) display The phone is powered by a 1.3 GHz quad-core MediaTek MT6580 processor and 1GB of RAM The Intex Aqua Pride has a 5 MP primary camera and a 2 MP front-facing camera It comes with 8GB of built-in storage which can further be expanded using a microSD card Connectivity includes dual-SIM 3G, Wi-Fi 802.11 a/b/g/n, Bluetooth 4.0, GPS, and a microUSB 2.0 port The device has a 2,800 mAh battery

Intex Aqua Pride

Intex Mobile Phones
₹4999.00
RAM : 1GB
Storage : 8GB
Battery : 2800 mAh battery
Camera : 5 M.Pixels
SIM : Dual SIM (Micro SIM)
Operating System : Android OS, v6.0 (Marshmallow)

Latest Mobile Phones

;

Intex Aqua Pride Details

Introduction & Design
The Intex Aqua Pride is one of the most affordable smartphone devices in the Indian market. In spite of being an affordable device, the Intex Aqua Pride doesn't look like one. The device has a soft-touch removable back panel; it comes with a glossy finish around the edge of the device. On the front, the device has three navigational keys on the bottom and a LED flash beside the earpiece. The weight of the device is on the heavier side at 150g, and it is available in grey, white, and champagne colour variants.
Display & Camera
Intex has cut the manufacturing cost of the device by equipping it with a TFT display instead of on an IPS one. The TN panel does not provide as good viewing angles as the IPS panel does. Also, the resolution of the display is 854x480; the resolution is very low, but it is acceptable as there is no other device in the same price range that provides a better resolution. The cameras on the Intex Aqua Pride include a 5-megapixel rear-facing unit and a 2-megapixel front-facing unit. Both the cameras have fixed focus, which means that if the objects are too near or too far from the camera, then the camera can’t focus on those objects. Hence, you'll get a blurry picture. Although, Intex has provided a front-facing LED flash to aid in the low-light environment.
Software & Performance
On the software side, the Intex Aqua Pride comes with Android 6.0 Marshmallow. As this is a budget device, there is no guarantee that the device will receive any further Android updates.  The Intex Aqua Pride is powered by a MediaTek MT6580 chipset that has a quad-core Cortex-A7 processor. The RAM on the device is 1GB and the internal storage 8GB that can be expanded via a microSD card. You can visit here for octa-core Intex smartphone devices.
Battery & Connectivity
As the Intex Aqua Pride is a very power-efficient device, it has been fuelled by a 2,800 mAh removable Li-Po battery. Other features include Emergency Rescue and Smart Awake. The Intex Aqua Pride is not a 4G enabled device. Although, it supports dual-SIM 3G, Wi-Fi a/b/g/n, Bluetooth 4.0, FM Radio, and GPS.

Intex Aqua Pride Specifications

Summary

Processor
Display
Storage 8GB
Rear Camera 5 M.Pixels
Battery 2800 mAh
RAM 1GB

Display

Display Type TFT
Resolution 480x854 pixels
Pixel Density 196 pixels per inch (ppi)
Touchscreen type Capacitive
Color Reproduction 16M Colors
Screen to body percentage 66.7 %

Storage

RAM 1GB
Internal 8GB
Expandable MicroSD, 32GB

General

Water Resistant No
Weight 150 grams

Software

Operating System Android OS, v6.0 (Marshmallow)

Camera

Rear 5 M.Pixels
Selfie 2 M.Pixels
Rear Camera Features Rear Flash
Video Yes

Battery

Type Li-Po
Capacity 2800 mAh

Connectivity

GPS Yes
Wi-Fi Yes
Bluetooth v4.0
SIM Configuration Dual SIM (Micro SIM)
NFC Chipset No
Infrared No

Processor

CPU 1.3GHz
No of Cores 4 (Quad Core)

Sensors

Accelerometer Yes
Gyroscope No
Disclaimer: Specifications shown may be different from the actual product. We cannot guarantee that the information provided on this page is 100% correct. Please check with the retailer before purchasing.

Copyright © 2024 NANO TECHNOLOGY PVT. LTD. . All rights reserved